Home - Product Center - Information Center - Technical Center - Contact Center - Newsroom - Site Map

 

 

 

 

 

 

 

FX-1000p-B Bufferless Chlorine Analyzer

"Electrical"

 

 

 

 

 

 

 

Foxcroft Equipment and Service Co., Inc.

2101 Creek Road

Glen Moore, PA  19343  USA

610-942-2888

FAX 610-942-2769

 

email sales@foxcroft.com

 

 
FX-1000p-B Home Page
Buy Go to Shopping Cart

Price Quote

Plumbing

Electrical
AC Power Connection
4-20mA Output
High/ Low Relays
Connecting a Recorder
  Connecting a Telephone Dialer
  Connecting a Metering Pump
  Wiring a Compound Loop System
Data Logging

Mounting and Location
Applications
Product Highlights
Product Dimensions
Maintenance
How the FX-1000p-B Works
Product Specifications
Accessories
FX-1000p-B Parts Center
FX-1000p-B O & M Manual
Choices below all in PDF Format
Engineer Specs PDF
Product Brochure PDF
 

 

 

 

 

 

Conduit Holes:

Run all wiring to the FX-1000p-B Bufferless in 1/2-inch, grounded metal conduit.  If using only shielded cable, appropriate strain relief or cable grips are required.   Seal unused cable entry holes with appropriate plugs.

 

 

 

Important

The electronic enclosure is not a junction box and should not have any other wiring running through it.

 

This non-metallic enclosure does no automatically provide grounding between the conduit connections  Grounding must be provided as part of the installation.

 

Electrical Connections:

Make electrical connections to terminal strips located on the bottom circuit board in the enclosure.  To access this board, unfasten the retaining nuts on the four threaded standoffs, and carefully remove the cover plate and top display/controls circuit board.  Make sure that the ribbon interconnect cable remains securely attached at both ends.