Model FX-CL-P & FX-CL-HP Reagentless Peracetic Acid & Hydrogen Peroxide Analyzers

 

The Foxcroft FX-CL-P & FX-CL-HP are disinfectant analyzers for continuous online measurement of peracetic acid (PAA) and hydrogen peroxide. They feature amperometric sensors with a selective non-porous silicone rubber membrane that is resistant to chemicals and detergents.

 

Foxcroft FX-CLT reagentless total chlorine analyzer  Foxcroft total chlorine sensor  Chemical_resistant_CL02__O3_sensor_verticalsm

Operation and maintenance is simple and economical; no zero point calibration is needed and the analyzer has no moving parts. It requires only periodic calibration, electrolyte and membrane cap replacement.

The PAA sensor is available for ranges 0-500, 0-20,000 and 0-50,000 mg/l (ppm). The hydrogen peroxide sensor is available for ranges 0-500, 0-10,000, 0-20,000 and 0-50,000 mg/l (ppm). Both are designed for applictions including food, beverage, dairy and pharmaceutical processes.

Results are displayed on a 4.3" full color LCD touch screen interface rated for a minimum 1 million touches on any one point. The screen displays concentration, high / low disinfectant alarm, flow status and alarm (optional item), and processor status.

FEATURES

  • 24VDC micrprocessor electronics can accept up to (8) sensors, PID control or enhanced communications. Flash upgradeable, settings stored in non-volatile memory.
  • (1) 4-20mA output, up to (4) optionally
  • (3) Form C relays with configurable levels and delay for high and low disinfectant and (optional) no/low flow alarm. Up to (8) relays available optionally.
  • Digital RS485 serial port